Timemore Autospin WDT Tool | Automatic Espresso Distributor
Tech Specs
Tech Specs
In The Box
In The Box
Warranty
Warranty
Puck prep, fully automated.
Great espresso starts before the shot, and the Timemore Autospin WDT Tool removes the guesswork entirely. Place it on your 58mm portafilter and it starts on contact, working through a complete distribution cycle that breaks clumps, levels peaks and leaves a uniform coffee bed every time. Lift it away to stop early, or let it finish on its own. No buttons, no fuss.
Planetary 12 needle distribution
Twelve 0.3mm needles travel in a fixed orbital system, rotating like clockwork for total bed coverage. By alternating between clockwise and counter-clockwise orbits, Autospin achieves complete uniformity without the centrifugal force that pushes grounds to the edges. The result is even density throughout the puck, less channelling and more consistent extraction.
Engineered for repeatability
Manual WDT relies on your hand speed and pressure, so results vary shot to shot. Autospin standardises the RPM and cycle, giving you a perfectly uniform bed every single time. The open top design lets you watch the planetary movement in real time, making puck prep as engaging as the extraction itself.
Built to fit, built to last
A wide four legged base sits securely on 58mm baskets while protecting the needles between uses. The 22mm needles offer deep-reach coverage ideal for 18g doses and larger, and are fully trimmable to suit your specific basket depth. Six spare needles are included for stress-free replacements.
A 500mAh battery charges over Type-C to full in around 1.5 hours and powers more than 2,000 cycles per charge. A single LED keeps you informed at a glance, so you always know where you stand.
A note on compatibility: the Autospin is designed for 58mm straight-walled baskets only. It is not compatible with curved-walled baskets or 3-lug portafilters.
Frequently Asked Questions
The Timemore Autospin WDT Tool fully automates puck distribution, where a manual WDT tool depends on your hand speed and pressure. Twelve 0.3mm needles travel in a fixed planetary orbit, alternating clockwise and counter-clockwise to deliver total bed coverage. Because the motor standardises the RPM and cycle, you get a uniform coffee bed shot after shot, removing the human error that makes manual results vary.
The Timemore Autospin WDT Tool is fully automatic. Place it on top of your portafilter and it starts on contact, running a complete distribution cycle with no buttons to press. Lift it off to stop the cycle early, or leave it in place to finish on its own. The open-top architecture lets you watch the planetary orbital movement as it works.
The Timemore Autospin WDT Tool is designed for 58mm baskets and uses a wide four-legged base to sit securely on the rim while protecting the needles. It fits straight-walled baskets only and is not compatible with curved-walled baskets or 3-lug portafilters.
The Timemore Autospin WDT Tool uses twelve 0.3mm needles that extend approximately 22mm into the basket, giving deep-reach coverage ideal for 18g doses and larger. The needles are fully trimmable, so if you use smaller baskets you can shorten them to your preferred length for a custom fit. Six spare needles are included for easy replacement.
Yes. The Timemore Autospin WDT Tool breaks up clumps and evens out density across the entire puck, which reduces channelling and supports more consistent extraction. The bidirectional planetary motion avoids the centrifugal force that can push grounds to the edges and create uneven density, a common issue when spinning a manual tool too quickly.
The Timemore Autospin WDT Tool has a 500mAh lithium battery and charges over Type-C, reaching a full charge in around 1.5 hours. A single charge powers more than 2,000 distribution cycles, so most users only need to top it up occasionally. The charging cable is not included, and Timemore recommends charging the device every three months if it is not in regular use.
The Timemore Autospin WDT Tool is not washable and should be kept dry at all times. After use, clean it promptly with an air blower or a soft brush rather than water. To protect the internal motor and mechanics, never pour coffee grounds into the top of the device.
